CAR-VZ Vertical Carving Additive (136Kg)
$1,650.00 + GST
Description
CAR-VZ Vertical Carving Additive (136Kg)
CAR-VZ is a pre-blended powdered admixture that increases the performance of vertical carving applications.
BENEFITS OF USE
- Excellent adhesion for vertical and overhead applications
- Optimum carving properties
- Includes a specialty fiber to reduce cracking, invisible to the naked eye, and will not affect the
carving experience
- Simple one dose powdered admixture
- Enhanced freeze/thaw protection
- Reduces efflorescence
- Boosts compression and flexural strengths
DESCRIPTION
CAR-VZ is a pre-blended powdered admixture that increases the performance of vertical carving applications.
INSTRUCTIONS FOR USE:
Car-VZ is designed to provide excellent performance at 12% of the cement weight. Optimum performance when dosed at 17% of cement weight.
When making your mix from scratch we suggest the following example as a good starting point:
42kg of type I Portland cement
5.6kg of Car-VZ
57kg of coarse sand (no 6 mesh)
Water is added slowly during mixing to meet your desired consistency.
Make some trials and adjust as preferred.
When adding Car-VZ to a pre-blended mortar mix figure that the blend is roughly 33% cement.
To further customise/ personalise your desired mix you can add additional fibre/ clay or any material of your choice.