Tec7 Gun – making application Tec7 adhesives and sealants EASY
Our Tec7 Gun is the perfect partner to our Tec7 product range for professionals and DIY enthusiasts alike.
Benefits of using the Tec7 1:18 Caulking Gun:
-
Tec7 1:18 Caulking Gun can be used for most products in cartridges, regardless of viscosity.
- It has a flow stop control switch that enables a clean finish. The flow stop control switch is the black clip on the release trigger which offers two possiblities, down for continuous pressure, up for a slight regression of the piston to obtain a smoother and slower pouring (spouting) of softer products.
- It has a stainless steel piston rod with a hook at the end to allow the gun to be hung. This also reduces rust and corrosion issues. The gun has a reinforced transmission system, this section of the gun will require lubrication from time to time. There is an embossed logo on the gun , inducating where to lubricate.
- The Tec7 Gun is ergonomic in use thanks to its balance and spinning handle which enables placing the nozzle at the right angle, even when applying prouct around corners.
- The gun is of very solid construction substantially increasing its life span.
- It has an open cartridge holder making changing over cartridges quick and easy.
- It has an 1:18 compression ratio, reducing the amount of pulling movements required for product application.
Tec7 tip: Be sure to oil your Tec7 gun on a weekly or fortnightly basis. There is a small oil symbol embossed on the gun near the trigger mechanism showing the user where to insert the oil. Following this process with prolong the life of the Tec7 Gun.
